|
|
Experimental testing of hydroinsulating injection screens efficiency in dependance on properties of building materials
Červenka, Martin ; Černý, Vít (referee) ; Drochytka, Rostislav (advisor)
The most of the buildings are almost always faced with moisture in our climate. In the past, the humidity was reduced and conducted only by mechanical methods. Over time, chemical wet masonry method also known as chemical infusion curtain was invented and introduced into practice. This method involves the creation of boreholes at a selected height of humid masonry. These boreholes are impregnated with special solutions. These solutions in humid masonry fill pores in the field of boreholes and thanks to this subsequence the monolithic waterproofing curtain is created. The objective of this work is to determine the methodology for verifying effectiveness of various types of waterproofing injection curtains depending on the properties of the various types of building materials.
|
|
|
Family house
Pánek, Martin ; Klimeš,, Vladimír (referee) ; Klimešová, Jarmila (advisor)
The main concern of this thesis is to design three storey family house. The house is divided into the main living area to the garage and basement areas and a part of an establishment. There is 2 floors in the house and there is partially a basement. The house has a flat roof.
|
|
|
Risk analysis of waterproofing systems of buildings
Vepřek, Karel ; Čech, Josef (referee) ; Novák, Jindřich (advisor)
A general overview of the waterproofing materials. Distribution waterproofing systems according to their use in construction. Listing the possible risks of defects waterproofing systems. Remediation and prevention of defects in the insulation. General summary of the risk lifecycle isolation and analysis of defects in the insulating elements on the real structure.
|
|
|
Laboratory testing of hydroinsulating injection gel´s efficiency in dependence on state of various building materials
Miková, Lenka ; Dohnálek,, Pavel (referee) ; Drochytka, Rostislav (advisor)
Nowadays the use of chemical gel injection for humid masonry provides many benefits. If we consider the financial aspects of this kind of remediation of humid masonry, we can say that this method is least expensive and time-consuming. In comparison with other remediation methods major interventions into the structure is not required, which could result in deterioration of the structural analysis of the works and the consequent need of special machinery, which subsequently increases spent effort and resources. There is also need for additional screens easily applied to walls breached by rising damp and this need is also required for research in dealing with this issue. Only a standard regulation dealing with remediation of wet masonry using chemical injection is directive WTA 4-4-04 / D – Injection of masonry against capillary moisture. From this point of view there is a clear need for further development in this area.
|
|
|
LIVE UP apartment complex in Brno - planning of implementation of construction
Dejmalová, Hana ; Řihák, Pavel (referee) ; Šlanhof, Jiří (advisor)
The subject of the master´s thesis are selected parts construction technology project apartment house LIVE UP in Brno – Bohunice. It is a new building with one underground floor and six overground floors. Construction of the house is monolithic and upper floors are bearing masonry walls. The work includes technical reports, study the implementation of major construction phases, organization of the construction, technological regulation of flat single-roof, itemized budget with the statement of measurements, time schedule, inventory of machines.
|
|
|
The Family house
Blinková, Jana ; Berka, Pavel (referee) ; Donaťáková, Dagmar (advisor)
The solution of bachelor´s thesis is family house in Janová. The building has two floors. It is designed of ceramic system POROTHERM. The house is covered with a saddle roof. The house is designed for four people.
|
|
|
Gel infusion screen system for additional waterproofing of various types of masonry with share of secondary raw materials
Melichar, Jindřich ; Klečka,, Tomáš (referee) ; Dohnálek,, Pavel (referee) ; Novotný, Miloslav (referee) ; Drochytka, Rostislav (advisor)
Virtually any construction project in our climate zone is facing some form of moisture. Older and historical buildings are mostly affected by the negative impact of water. Previously, the additional reduction of the moisture was executed only by mechanical methods, pushing insulating sheets or breaking through and cutting of masonry. Over time chemical methods were also invented, which are compared to the mechanical considerably simpler and user friendly applications to statics of treated buildings, making them ideal for the treatment of historical buildings or buildings that would not bear significant disruption. The main principle of chemical methods of redevelopment of wet masonry is the application of special material into the line of drilled holes with a given pitch. Subsequent penetration of the grouting material is believed to intersect an arc of individual drill holes, and thus to create so-called grout curtain that prevents the accumulation of water above it. Injection material may also contain a proportion of secondary raw materials, thereby reducing the influence of the impact of production on the environment. Efficiency infusion materials in masonry affected by many factors, such as temperature, humidity, or the type of material treated. It is also an important factor to determine the effectiveness of the remediation of the material, proving its ability to penetrate the building material by identifying its presence in it.
|
|
| |
|
| |
|
| |
guest ::
